Radial Engineering StageBug SB-6 Two Channel Passive Stereo Audio Isolator DI with Instrument Cable and Zorro Cloth

The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly.

Features

• The StageBug SB-6 is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices.
• If you're experiencing noise issues from pairing unbalanced and consumer-level gear (guitar, DJ equipment, laptop and mobile audio) with pro audio equipment, Radial invites you to step into a new world of buzz-free performance with the Radial StageBug SB-6 passive stereo line isolator.
• This fully passive (requires no power or phantom power) 2-channel isolator eliminates the 60Hz hum you get from unbalanced signals. Two independent isolation transformers and a choice analog signal path give you a supremely clean and uncolored signal path that's quite linear from 20Hz to 20kHz.
• The StageBug SB-6's onboard polarity switch corrects frequency cancellations when used with stereo playback system. And dual ground-lift switches and a -15dB pad ensure hi-fi audio all the way from your source to the listener. The Radial StageBug SB-6 is just another way Radial makes it easy to be a gigging musician and performer today
• The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops.