Radial ProMS2 Passive Microphone Splitter with 2x Microphone Cable and Zorro Cloth

Allowing you to send a single microphone or DI signal to up to 3 separate destinations, the ProMS2 Passive Microphone Splitter from Radial Engineering can be used in the studio to send a mic to multiple preamps for auditioning and live to send one source to multiple mixers or to supply a broadcast feed. It is a passive device, therefore requiring no power for operation. The Eclipse ET-MS10 transformer is designed to provide a flat frequency response while its RF filtering helps keep your signal interference free. The device features 14-gauge steel construction to stand up to live use.

Features

• The Radial ProMS2 is a balanced mic-level Passive 2-way Microphone Splitter designed to send a signal to multiple destinations simultaneously on stage, with one transformer-isolated output and two direct outputs INCLUDES :- 2 x Senor Microphone Cable and Zorro Sounds Polishing Cloth
• The ProMS2 is a mic splitter designed to split a single source to multiple destinations simultaneously without signal degradation or noise. A high quality Eclipse transformer inside provides galvanic isolation to eliminate hum and buzz from ground loops, while delivering a wide frequency response and low distortion
• Ground lifts on the outputs help further reduce noise, while an input pad allows line-level sources to be connected as well. The ProMS2 can be rack mounted for touring and installation purposes, with up to eight fitting in the Radial J-Rak
• Harnessing the full potential of an Eclipse ET-MS10 transformer, Radial's passive ProMS2 delivers professional-grade clarity for microphone splitting. Its nickel-laminated core lies at the heart of the ET-MS10 transformer's ultra-low harmonic distortion while suppressing phase shift and removing bandwidth limitations you'd get from budget mic splitters
• In fact, radial talking about 115dB of common-mode noise rejection backed by a MuMETAL-shield in one of Radial Engineering's freakishly tough steel enclosures. The ProMS2 rejects RFI, EMI, DC line noise, and ground-loop hum with heroic efficiency. If you're setting up a whole bank of mic splitters, then radial engineering has what you need. Check out these rackmountable Radial J-Rak chassis.