Yamaha HS7 95W 6.5-Inch Powered Studio Monitor (Pair) in White with 2 x Senor XLR Microphone Cable - 20'

The white HS7 Powered Studio Monitor from Yamaha is a 2-way reference speaker that is designed for mixing and monitoring in your home or studio.

Equipped with a 95W bi-amplification system that powers a 6.5" woofer and a 1" tweeter, the HS7 is designed to offer maximum headroom, minimal distortion, and an extended response up to 30kHz.

The HS7 has both an XLR and 1/4" TRS input that accept either balanced or unbalanced signals for maximum flexibility in a variety of studio setups.

Low Resonance Enclosure Design

HS Series cabinets are designed to eliminate unwanted resonance and increase the accuracy of sound reproduction to their extreme limit.

The enclosures are constructed from a dense MDF with a damped acoustic response. HS Series engineers also employed a traditional three-way mitered-joint technique.

Common to architectural design, this construction firmly anchors the corners of the enclosure to improve durability and eliminate unwanted resonance that can influence overall sound

Noise Reduction Technology

Speaker port design can greatly influence the clarity of overall sound. Often a vortex at the either end of the port can generate air vibrations inside of the port, causing unwanted noise.

By adopting a noise reduction technology that incorporates an analysis of a visual representation of the sound, Yamaha's engineers are able to control and reduce the vortex. Through this analysis Yamaha has arrived at a port design that reduces noise up to 6dB

Controls and Connectivity

HS Series full-range models feature two response controls with settings that allow them to adapt to the surface acoustics of rooms of varying shape and size.

Yamaha HS7 Active Studio Monitor Features

• High-performance drivers and mounting system
• 6.5" cone woofer, 1" dome tweeter
• Large magnets in an Advanced Magnetic Circuit design
• Built-in bi-amplification: 60W LF, 35W HF
• Dedicated power amps are perfectly matched to the woofer and tweeter
• Enclosure is designed to kill unwanted resonances that can influence sound
• Room-control and high-trim response controls give you optimum response in any room

Specifications

• System Type: 2-way bi-amp powered studio monitor
  
• Frequency Response: 43 Hz - 30 kHz
  
• Crossover Frequency: 2 kHz
  
• LF Driver: 6.5" cone
  
• HF Driver: 1" dome
  
• Total Output Power: 95W (LF: 60W, HF: 35W)
  
• Input Sensitivity: -10 dBu / +4 dBu
  
• Input Connectors: XLR3-31 type (balanced), PHONE (balanced)
  
• Level Control: (+4 dB / center click)
  
• EQ: Room Control (0/-2/-4 dB under 500 Hz), High Trim (+/-2 dB at HF)
  
• Cabinet Material: MDF
  
• Finish: White
  
• Dimensions (W x H x D): 210 mm x 332 mm x 284 mm (8.3" x 13.1" x 11.2")
  
• Weight: 8.2 kg (18.1 lbs)
  
• Length: 20 feet
  
• Connectors: XLR Female to 1/4 inch TRS Male
  
• Shielding: High-density OFC (Oxygen-Free Copper) braided shield
  
• Jacket: Durable and flexible PVC jacket
  
• Conductors: Twisted pair OFC conductors for superior signal transfer